INDUSTRLAL electronic
your location : Home
> Weidy Express > Weidy Dynamics >
Film capacitor manufacturers share how to connect single-phase motor capacitors
2024-07-25 19:43:49
Single-phase motors usually use starting capacitors and running capacitors to provide the phase difference required for starting and running. The following is the basic wiring method of single-phase motor capacitors shared by film capacitor manufacturers:
1. Starting capacitor wiring:
① The starting capacitor usually has two pins, one is "C" (Common, common end) and the other is "S" (Start, start end).
② Connect the "C" end of the starting capacitor to the starting winding of the motor, usually one port of the starting coil of the motor.
① The running capacitor usually has two pins, one is "C" (Common, common end) and the other is "R" (Run, run end).
② Connect the "C" end of the running capacitor to the other port of the main coil of the motor, and connect it with the "S" end of the starting capacitor.
③ Connect the "R" end of the running capacitor to one port of the running coil of the motor.
3. Connect the motor body:
① Connect the other port of the motor to the phase line of the power supply.
② Connect the other ports of the motor to the neutral line of the power supply.
③The ground wire should be connected to the metal part of the motor to ensure safety.
Make sure to disconnect the power supply before wiring and follow all safety operating procedures. If you are not familiar with electrical work, it is recommended that a professional electrician perform the installation and wiring. Improper wiring may cause equipment failure, risk of electric shock or fire hazard. If you have motor capacitor production needs, please contact Wei Di Industrial.
Film capacitor manufacturers recommend Shenzhen Wei Di Industrial, which focuses on the production of film capacitors, polyester film capacitors, polypropylene film capacitors, SMD Y capacitors, ceramic capacitors, and varistors. It has a 10,000 square meter production base, a 200+ production team, and 200+ production equipment, supporting non-standard customization of products.
1. Starting capacitor wiring:
① The starting capacitor usually has two pins, one is "C" (Common, common end) and the other is "S" (Start, start end).
② Connect the "C" end of the starting capacitor to the starting winding of the motor, usually one port of the starting coil of the motor.
③ Connect the "S" end of the starting capacitor to one port of the main coil of the motor.
① The running capacitor usually has two pins, one is "C" (Common, common end) and the other is "R" (Run, run end).
② Connect the "C" end of the running capacitor to the other port of the main coil of the motor, and connect it with the "S" end of the starting capacitor.
③ Connect the "R" end of the running capacitor to one port of the running coil of the motor.
3. Connect the motor body:
① Connect the other port of the motor to the phase line of the power supply.
② Connect the other ports of the motor to the neutral line of the power supply.
③The ground wire should be connected to the metal part of the motor to ensure safety.
Make sure to disconnect the power supply before wiring and follow all safety operating procedures. If you are not familiar with electrical work, it is recommended that a professional electrician perform the installation and wiring. Improper wiring may cause equipment failure, risk of electric shock or fire hazard. If you have motor capacitor production needs, please contact Wei Di Industrial.
Film capacitor manufacturers recommend Shenzhen Wei Di Industrial, which focuses on the production of film capacitors, polyester film capacitors, polypropylene film capacitors, SMD Y capacitors, ceramic capacitors, and varistors. It has a 10,000 square meter production base, a 200+ production team, and 200+ production equipment, supporting non-standard customization of products.
Scan code 5 seconds